refining ladle:metallurgical machine

Main Applications: 1. Refining ladle is a ancillary facilitiesin for MC/LC-FeMn pruducing. It is usedto recycle manganese from manganese slag and Pre-desilication for hot FeMn In shaking state, the sicillon contained in liquid non-standard MC-FeMn react with the manganese in manganese slag, recycling about 75% manganese frommanganese slag which melt into the liquid non-standard MC-FeMn,also it can reduce the silicon content inFeMn .This will not only maximize recycle manganese from manganese slag, but slao shorten the refining time in refining furnace. With refining ladle you can reduce the requirement for manganese component and purchase low-cost manganese arc, resulting in enormous economic benefits. It can recycle about 75% manganesecontained in the manganese slag . 2. Refining ladle is also used to decarburizationin the producing of siliconchrome(raw materials forLC-ferro chrome produce) Mix the liquid silicon chrome with slag powder which is made up ofLC-ferrochrome slag and fluorite powder,and then start the refining ladle at 50-70r/min rotational speed for about 10-15 minutes. After treatment, the carbon content can be reduced to below 0.02%, decarburization efficiency above 90%. Advantages: Low-input, high-quality, simple operation, easy maintenance.The ferroalloy refining in converters features easy sedimentation, less burning loss, and high ratio of recovery .Since its introduction, it has been well received by extensive customers. Main technical parameters: Model 30T 15-20T 10T 5T Eccentricity 100-140mm 100-140mm 60-100mm 50-80mm Capacity 10M³ 6-8M³ 2.4M³ 1.2M³ ShakingSpeed 45-60r/min 45-60r/min 50-70r/min 50-70r/min MotorPower 55-75kw 37-45kw 30kw 18.5kw Other specifications can be designed and manufactured to users requirements